Triggering photo fermentative biohydrogen production through NiFe2O4 photo nanocatalysts with various excitation sources.

The triggering effects of nickel ferrite (NiFe2O4) photo nanocatalysts on photo fermentative hydrogen production (PFHP), and metabolic pathways under various excitation sources (incandescent lamp, Xenon lamp, and 532 laser) have been investigated. Compare to the control group (CG) highest cumulative hydrogen volume (CHV) and the maximum hydrogen production rate (HPR) of 568.8 mL and 9.17 mL/h, respectively were achieved at a loading centration of 150 mg/L excited with an incandescent lamp. The change in metabolites with NiFe2O4 incorporation suggests that bacterial activity is significantly affected by photo nanocatalysts. Triggering of NiFe2O4 by laser excitation showed the highest HPR of 7.83 mL /h within 24 h, which greatly reduces the lag time. The microbial community investigation showed that the addition of NiFe2O4 photo nanocatalysts and the change of light source effectively improved the microbial community structure and increased the abundance of hydrogen-producing bacteria (HPB) which leads to enhanced hydrogen production.

Thermal Transport in Extremely Confined Metallic Nanostructures: TET Characterization.

In recent years, the continuous development of electronic chips and the increasing integration of devices have led to extensive research on the thermal properties of ultrathin metallic materials. In particular, accurate characterization of their thermal transport properties has become a research hotspot. In this paper, we review the characterization methods of metallic nanomaterials, focusing on the principles of the transient electrothermal (TET) technique and the differential TET technique. By using the differential TET technique, the thermal conductivity, electrical conductivity, and Lorenz number of extremely confined metallic nanostructures can be characterized with high measurement accuracy. At present, we are limited by the availability of existing coating machines that determine the thickness of the metal films, but this is not due to the measurement technology itself. If a material with a smaller diameter and lower thermal conductivity is used as the substrate, much thinner nanostructures can be characterized.

Effects of Current Annealing on Thermal Conductivity of Carbon Nanotubes.

This work documents the annealing effect on the thermal conductivity of nanotube film (CNTB) and carbon nanotube fiber (CNTF). The thermal properties of carbon nanotube samples are measured by using the transient electro-thermal (TET) technique, and the experimental phenomena are analyzed based on numerical simulation. During the current annealing treatment, CNTB1 always maintains the negative temperature coefficient of resistance (TCR), and its thermal diffusivity increases gradually. When the annealing current is 200 mA, it increases by 33.62%. However, with the increase of annealing current, the TCR of CNTB2 changes from positive to negative. The disparity between CNTB2 and CNTB1 suggests that they have different physical properties and even structures along their lengths. The high-level thermal diffusivity of CNTB2 and CNTF are 2.28-2.46 times and 1.65-3.85 times higher than the lower one. The results show that the decrease of the thermal diffusivity for CNTB2 and CNTF is mainly caused by enhanced Umklapp scattering, the high thermal resistance and torsional sliding during high temperature heating.